Waste-Heat Sludge Dryer
- 1 kWh electricity alone is capable to remove as much as 4.2 kg of water from wet sludge, comparing to normal 1-2.5 kg water per kWh. Save energy bill and reduce carbon footprint.
- Reduce wet sludge volume by 67% and weight by 80%. Save transportation cost.
- Control processing temperature under 75ºC with outlet dried sludge temperature below 50ºC. Intrinsic safe and no explosion worries.
- Zero odor emission and sterilization rate higher than 90%. Eco-friendly.
- With utilization of waste-heat, it takes only 50 kWh electricity to remove 1 ton of water from wet sludge. More economical.
Low Temperature Waste-heat Sludge Dryer
(1) 1 : 4.2
1 kWh electricity alone is capable to remove as much as 4.2 kgs of water from wet sludge, comparing to normal 1-2.5 kg of water per kWh. Save energy bill and reduce carbon footprint.
(2) 67% / 80%
Reduce wet sludge volume by 67% and weight by 80%. Save transportation cost.
(3) 75ºC / 50ºC
Control processing temperature under 75ºC with outlet dried sludge temperature below 50ºC. Intrinsic safe and no explosion worries.
(4) 0 / 90%
Zero odor emission and sterilization rate higher than 90%. Eco-friendly.
(5) 50 : 1
With utilization of waste-heat, it takes only 50 kWh electricity to remove 1 ton of water from wet sludge. More economical.
Click for FULL Size
